Wednesday, March 18, 2009

Milling Persimmon Again


Finished up the butt log of the two persimmon logs I got out of the tree. There is a third top section still waiting to be skid to the mill. The log was around 14" small end, 16" big end before milling, and 17' long. The widest board is 14" and all is milled to 1x dimensional lumber. All the lumber is bastard sawn which is a colorful way of saying flat sawn. I sawed all the lumber into flitches, and then removed the bark by resawing on edge, for the maximum width boards possible. I started the milling on Sunday, and resawed on tuesday, and finally stacked the lumber for air drying today, on top of the other persimmon wood. I removed what was left of the bark with a drawknife. I finished my 8-way bamboo splitter today also. I plan to make some wooden handles out of poplar to go over the metal handles.

1 comment:

  1. nice work Joe, I am loving the updates on such a cool and ambitious project. You are clearly very good with your hands, those bamboo splitters look great and appear to function perfectly.

    ReplyDelete