Wednesday, March 25, 2009

Milling Juniper Again


Made progress on the log pile over the weekend and afternoons this week. I am down to the last 7 logs in the pile I had cut. I milled somewhere around a dozen logs over the weekend, using my last sharp bandsaw blade. I resawed the 30+ flitches left from the posts and still have some sharpness left in the blade. I took a rare break and went fishing with my brother on Sunday evening. I haven't been fishing in at least 10 years, and it was nice to be out on the water. I took some photos of an interesting tree I cut down. The tree had exposed heartwoood on two sides. The sapwood was divided into two seperate sections all the way up to the limbs. I made a nice stack of posts and lumber that is nearly as tall as me (i'm not very tall). I rolled my last 7 logs down to be milled when the rain clears. I have been having problems with insects boring into my bark/sapwood, so I am trying to hurry through these logs before really warm weather.

Wednesday, March 18, 2009

Milling Persimmon Again


Finished up the butt log of the two persimmon logs I got out of the tree. There is a third top section still waiting to be skid to the mill. The log was around 14" small end, 16" big end before milling, and 17' long. The widest board is 14" and all is milled to 1x dimensional lumber. All the lumber is bastard sawn which is a colorful way of saying flat sawn. I sawed all the lumber into flitches, and then removed the bark by resawing on edge, for the maximum width boards possible. I started the milling on Sunday, and resawed on tuesday, and finally stacked the lumber for air drying today, on top of the other persimmon wood. I removed what was left of the bark with a drawknife. I finished my 8-way bamboo splitter today also. I plan to make some wooden handles out of poplar to go over the metal handles.

Tuesday, March 17, 2009

4- Way Bamboo Splitter (takewari)


I made a 4-way bamboo splitter (takewari) yesterday. I welded it up from scrap metal, it isn't beautiful, but serves the purpose. I have a larger 8-way splitter halfway done on the workbench. The ones commercially available are made of cast iron and are quite costly ($27 for 4-way, $69 for 8-way). The cast iron ones cannot be struck with a hammer, mine can :D . It took about an hour to make the 4-way, and will have the 8 way finished with around 2.5 hours in it. I need to finish painting it tomorrow. I made it to overcome the problems of getting the long ~40' strips of bamboo I will need later on for making hoops for the wooden tub (ofuro). I am basing the construction off of what I learned from book on "The Tub Boats of Sado Island" by Douglas Brooks. The tub boats are also known as taraibune or hangiri.

I learned recently that bamboo continues growing internally year after year. The outside diameter is initially "shoots" up, and the distance between nodes will lengthen for the first year and a half. I believe what I recently harvested is a Japanese Timber bamboo known as Madake (phyllostachys bambusoides). Shown in the photo is a section of what would be a cane that came up last year, compared to a much older one, both with about the same outside diameter (2.5" and 2.75").